Jonesboro has an older housing stock, so a dripping or erratic shower here often has a two-handle compression valve or an early single-lever valve. Many can be rebuilt with new stems and seats; others need replacing with a modern valve. Call the number on this page to be connected with a local plumber in Jonesboro.

Symptoms to take seriously
- Each handle needs another quarter turn every month to shut the water off
- Tinted water for the first few seconds of a shower
- A jolt of heat in the middle of a shower when the kitchen tap opens
- A spray that has gone thin even though the sinks run full
- Grout cracking or tiles shifting around the handle escutcheons
Old compression valves forgive a lot, but not forever. Once a washer is gone, the stem grinds directly on the brass seat, and a seat that is chewed up enough has to be dressed or replaced. Calling while the drip is still small gives the plumber the most options.
Many Jonesboro bathrooms have also been remodeled once or twice over the decades, so the trim on the wall does not always match the valve behind it. That is one more reason the plumber looks before ordering anything.
Jonesboro's housing and water
Jonesboro is the Clayton County seat, with a railroad-era downtown and a National Register historic district. Census survey figures put the median year built at 1972, with about 69% of homes built before 1980. That means many bathrooms have separate hot and cold handles, sometimes with a third for the diverter, or early single-lever valves whose makers have changed or stopped supplying parts.
Clayton County Water Authority supplies water and sewer, and the City of Jonesboro refers water and sewer problems to CCWA. CCWA owns the service line from the main to the meter; the customer owns it from the meter to the house. In older homes, original galvanized supply pipes can shed rust flakes that settle in a valve's inlet screens. CCWA also installs and tests residential backflow devices itself.
The City of Jonesboro takes building permit and plan review applications through its Building Permits page, and Community Development reviews them. The page does not spell out plumbing-only permits, so ask the plumber or City Hall whether a valve replacement at your address needs one.
What moves the price
- Rebuild or replace: new stems and seats usually cost less than a new body.
- Finding parts: older valves can mean special orders.
- Old walls: plaster and tile without access panels need careful repair.
- Pipe condition: corroded supply lines near the valve may need work too.
When you call
The number on this page connects you with an independent plumber who serves Jonesboro. Say how many handles the shower has and describe the symptom. On site, the plumber shuts off the water, removes the trim and checks whether a rebuild will hold. If not, they explain what a replacement involves.
Shower Valve Repair questions in Jonesboro
Can an old two-handle or three-handle shower valve be rebuilt?
Can grit from main repairs or well water clog a shower valve?
Is an anti-scald or thermostatic valve worth the upgrade?
The shower won't turn off. What should I do right now?
More plumbing services in Jonesboro
Shower Valve Repair nearby
Sources
Last updated: