Slab Leak Repair in Morrow, GA

Morrow is a small, diverse city along I-75, anchored by Southlake Mall and Clayton State University. Census survey figures via Point2Homes put the median home at 1971, with about 62% built before 1980; the source notes its table is incomplete, so treat the share as approximate. CCWA's service line runs from the main to the meter, and the line from the meter to the house is the customer's.

What to do right away

1. Shut off every fixture and appliance.
2. Read the CCWA meter and watch for movement.
3. Check toilets with food coloring.
4. Look for warm, damp or stained floor areas.
5. Close the main if water is visible.
6. Call CCWA for a leak at the meter; call a plumber for a leak inside.

Symptoms and causes

Cost factors

• Locating time
• Spot repair or a reroute of original copper
• Flooring removal and replacement
• Water damage
• A city plumbing permit

The City of Morrow's Planning & Economic Development Department issues plumbing permits, through a Community Core online account or paper forms at City Hall. In a home from the late 1960s or early 1970s, rerouting the supply often makes more sense than one spot repair.

When the copper is fifty years old

In a Morrow ranch from the late 1960s or early 1970s, the leak that shows up first is rarely the only weak spot. Copper of that age often has thin areas wherever it rests on stone or crosses a footing. That is why many plumbers suggest testing both the hot and cold sides fully before choosing a repair. If the rest tests sound, one repair through the floor may be enough. If not, a reroute retires the buried run and moves new pipe somewhere it can be reached later. Before the visit, clear access to the water heater and mark any warm or damp floor areas so testing can start quickly.